10 Best 600 Watt LED Grow Lights – Pictures, Specs, and More
What’s the best 600W LED Grow Light on the market?
The best 600 watt LED grow lights will meet the essential requirements all sized grow lights should meet. That’s sufficient intensity, good spectrum, and good coverage area. I’ve researched and listed the best 600 watt grow lights in my list below.
I’ve sorted the list into two segments. The segments are high-end and low cost 600 watt grow lights.
You may be wondering why 600 watt grow lights can vary so much in cost if they’re all 600 watts? The truth is that wattage numbers in the grow light industry can be highly misleading.
Wattage numbers are not an accurate representation of performance or quality. These numbers can refer to one of two things: The total wattage of LEDs used in the light, or the total wattage consumed from your power outlet.
In the list below I’ll be sure to distinguish between the two. But you the more important factors to focus on are light intensity, spectrum and coverage area.
Best 600 Watt LED Grow Lights:
- Optic 6 Gen 3
- Crecer PanthrX
- HLG 600H Kit
- Timber LED Redwood VS
- G8LED 600w
- Advanced Platinum P600
600 LED watts:
- Viparspectra PAR600
- Bestva 600w Reflector
- Mars Hydro TS-600
True 600 watt lights perform better and are more expensive. 600 LED watts are less expensive but don’t perform as strong.
Keep reading below for the full information about each grow light:
Best High End 600 Watt LED Grow Lights:
These are all high quality, high performing LED grow lights, and so they tend to cost more. But if you’ve got the budget for them, they’re absolutely worthwhile. The difference in your grow between these and the lower cost lights will be noticeable.
Most of the 600 watt LED grow lights in this high end segment consume a 600 watts from your power outlet, compared to the more affordable 600 watt models where the 600 represents the total wattage of LEDs used.
Optic LED is a popular COB Grow light brand that’s known for their quality lights. The company offers a full product line of COB LEDs and accessories. The Optic 6 is a true 600 watt model with an impressive coverage area and PPFD readings.
I think the combination of price, light intensity, spectrum options and features make this one of the best 600 watt LED grow lights available.
You can buy the Optic 6 with one of two spectrum choices: One version contains 3000k COBS, the other version contains 3000k and 5000k COBs.
This Optic 6 uses six 80 watt CREE CXB 2540 COBs, and 96 supplemental 5 watt Bridgestar/EpiLEDs. Secondary lenses are installed over each COB, increasing intensity significantly. CREE is top shelf when it comes to LEDs so whenever you see CREE on a grow light, you know you’ve got quality.
One unique feature I really like about this light is the timer that’s built into the side of the light. You don’t see built in timers in nearly any other brand of light, but it’s a big convenience to be able to set it and forget it.
As I mentioned earlier you get two choices on spectrum, either 3000K or 3000K and 5000K mixture. I’d chose the mix because it’s a better balace for all phases of plant growth, whereas the 3000K might be more geared toward flowering. But it’s ultimately your choice.
As you can see, this light offers powerful blue and red spectrum. It’s ideal because you don’t want a light that’s heavy on one or the other. Balance is key.
The Optic 6 spectrum covers 380nm to 780nm wavelengths which includes UV-A and near infrared – two key wavelengths for boosting THC, CBD, yield, and ensuring your plant physically forms properly.
Light Intensity and Coverage Area:
Coverage area on this grow light is 4×4 for vegetative and bloom phases. One important thing to note is that your plants will actually receive usable PPFD intensity at the furthest edges of the Optic 6’s coverage.
It’s a real achievement by Optic LED because the PPFD on most other lights just isn’t significant at the furthest edges of coverage. But this type of light intensity is exactly what you want for maximum yield.
Definitely one of the best 600 watt LED grow lights around.
The Crecer PanthrX is certainly one of the best 600 watt LED grow lights on the market. It’s a little more pricey than the first option, but still one of my favorite 600 watt LED grow lights. The coverage on this one is also a little more uniform.
This light offers a full white spectrum, uniform 4x4 foot coverage, and a competitive price among high end grow light models.
The PanthrX pulls a true 600 watts from the power outlet, and uses the wattage quite efficiently as it emits 2.5 micromoles of light per joule consumed.
Near Perfect Spectrum:
Spectrum is one of the main factors to consider when you’re buying an LED grow light.
The industry has more or less settled on white light spectrum being ideal for growing fruit and vegetable bearing plants, including cannabis. That’s why you see most of the high quality grow lights now emit a white light spectrum.
What’s white light spectrum? It’s the same red & blue seen in most grow lights, but it has some green, orange and yellow mixed in as well. The light is emitted in a white color, not purple.
Light Intensity and Coverage Area:
The coverage area for these lights is similar to other grow lights on Amazon. The PanthrX will cover 4ft by 4ft with uniformly high intensity.
The difference with the PanthrX that’s more uncommon is the light remains intense even at the furthest edges of the coverage area.
If you take a peek at the image above you’ll see even at the edge of the 4×4 coverage area, the Crecer Lighting PanthrX is providing 500-800 uMol of light when hanging 24 inches above the canopy. You can safely hang it a bit lower, perhaps 18-21 inches and the intensity will be even better.
A very solid option if you’re looking for the best 600 watt LED grow light.
The HLG 600H is a true 600 watt DIY quantum board kit you can purchase and use for a 4x4 foot grow space.
Why is this one of the best 600 watt LED grow light options? It’s because you can get this true 600 watt version of HLG’s 4 panel board for less cost than the 480 watt HLG 550 V2. The price is very competitive, and you get the modern quantum board design and great performance HLG is known for.
With the HLG 600H, you’ll get HLG’s signature R-Spec spectrum, which is 3500K white light plus 660nm red diodes. It’ll get you through all phases of plant growth.
Light Intensity & Coverage Area:
In terms of light intensity, the HLG 600H may be the best 600 watt LED grow light available. You can see in the video below, the light measures 1200 PPFD at 24 inch hanging height, and goes to 700 out at the edges. You’ll be able to get a very solid cannabis yield with that intensity.
The coverage area on the HLG 600H is 5x5 ft for veg and 4x4 ft for flowering. Just what you’d expect from a high end LED grow light.
HLG 600H Assembly:
Check out this super helpful assembly video by my friends at LED Grow Lights Depot. The installation is straightforward and you really only need a screwdriver and wire strippers (or scissors).
All around a really solid choice if you’re looking for a true 600 watt LED grow light.
The Timber LED Redwood VS is a true 600 watt COB LED grow light. It uses powerful Vero 29 Gen 7 COB LEDs to cover a large area of 4x4 feet.
The Redwood VS is the flagship in the Timber LED lineup, and features high quality white spectrum hand built to order in San Diego. It’ll take about 5 days to ship out – not that bad.
For spectrum you’ll be able to specify 3000, 3500, or 4000 kelvin temperature. 3500K is the most popular option and is ideal for seedling to flower growth phases, while 4000k is more ideal for the vegetative phase only, and 3000k is more ideal for the flowering phase only.
The light is fully dimmable from 10% to 100%. It’s a nice feature to have considering how strong these lights can be when hanging low.
Peak intensity is around 1350 uMols, so it’s plenty to get a maximum yield out of your cannabis plants. 40 moles of light -- 925 uMol during a 12 hour light cycle is all you’ll need. Above that plants experience diminishing returns on yield.
Add in the 3 year warranty and this is one of the best 600 watt LED grow lights on the market!
This G8LED 600 watt LED grow light is the first on my list to feature a purple spectrum, but this is an award winning light and it deserves a mention on the list.
They were named the 2018 Wiki Top Ten #1 LED grow light. They were also named “Best Grow Light” in 2016 and 2017 by High Times Magazine.
This is also the first like that isn’t a true 600 watt model. It pulls 380 watts of power from the outlet.
Truth be told, DormGrow has spent a hefty amount of money and time in research and development. Moreover, each passing year this brand has updated their grow lights to make them more efficient and durable.
Moving on to light quality and efficacy, the G8LED is among the top in the pack.
The G8LED 600W LED Grow Light produces highly efficient light with 8 band spectrum along with high quality and real IR and UV.
You may be wondering how an award winning light produces only 8 bands of light as opposed to the normal 12 bands? G8LED manufacturer Dorm Grow discovered through research that 12 bands are actually wasteful and going to 8 from 12 improves power usage without affecting plant yield.
PPFD value measured in this grow light from the height of 16” is 1480 uMol which is best in the segment at this price.
With highly efficient brightness this grow light by G8LED can easily cover a grow space of 4x4 ft.
Plants grown beneath this grow panel seems to be healthier and greener compared to other low-quality light panels.
G8LED doesn’t provide a switch for different grow cycles because turning off the red diodes during vegetation will make this grow panel underutilized.
Dorm Grow’s research team has thoroughly thought through the design of this panel, and while other manufacturers are wasting time implementing
They’ve also designed and developed a dedicated 90W Flower Booster which works as a boon for the plants in the blooming stage.
This grow panel is equipped with high quality, and the USA made LEDs which are tested well before assembly.
Although it can produce light equivalent to a 600W HPS grow light, it only draws 380 watts from your wall outlet. Yeah, if you don’t believe, then you can compare its yield with the yield of an HPS of 600W grow light.
G8LED 600W grow light is observed to be colder than any other grow light even after continuous use of 24 hours. Though we recommend to turn it off for at least 2-4 hours every day to avoid any harm to your plants.
Credit goes to their heat dissipation technology.
Definitely it’s one giving a strongest competition on the market to Advance Platinum P600 LED.
With all these features and benefits you’ll be getting a stellar customer support from G8LED for a period of two years.
G8LED 600W Grow Light – Specification And Details
||21” x 14” x 3”|
||1480 uMol @ 16”|
||8 Band Spectrum|
|Avg Power Draw (Max) :
|Avg Coverage (Max.)
||4.5’ x 4’|
||AC110V – 240V|
||Cool Grow Space After Continous Use of 24 Hours|
Pros and Cons Of G8LED Mega 600
- Excellent 8 Band Spectrum
- Best in the segment coverage
- Unbeatable PPFD Results
- Higher Yield Per Watt Of Electricity
- High Quality Build
- Durability For Longer Run
- Efficient Power Draw
- Marvelous cooling for panel and tent.
- High level of customer satisfaction with 2 year support
- A bit costly (This is the gold standard grow light)
- Heavy Weight Design.
If you’re planning to spend your bucks in a high-quality product which lasts longer than any cheap product, as well as performs beyond the mark, then you should go with G8LED 600W LED Grow Light.
Looking at its brightness, efficiency, and cooling we can’t stop ourselves from recommending this product to you even though it requires a separate flower booster. However, even without the booster, it is capable of producing high-quality results.
So, make your decision wisely and go with it if you’re not short on budget.
If you like the G8LED brand but need a higher output, then perhaps you’d like to read our review for G8LED Mega 900W Grow Light.
Advanced Platinum is a brand known for its quality and quantity. They offer a variety of full spectrum LED grow lights to cultivators. Platinum LED markets their lights as the best PPFD values per watt of any LED grow light. That’s the type of quality you need to grow abnormally large marijuana plants.
Advanced platinum series P600 is equipped with high quality of LEDs and efficient auto-switching drivers to prevent power overload.
The P600 doesn’t pull 600 watts from your wall it pulls 184w in veg mode and 364 during flower mode.
It utilizes 200 Bridgelux and CREE LEDs of 3W each to transmit the best quality of light to your plants. So the 600 represents LED wattage. These LEDs have a lifespan of 100,000 hours.
The Advanced Platinum P600 is equipped with voltage sensing and adjusting power drivers. The light can adapt to all international power cords, adapting from 85v to 260v. It’s built with 90 degree focusing lenses to help intensify the light output to your canopy.
The exterior is sleek and durable, able to withstand long term use. Simply make sure to keep it away from dripping water.
Advanced Platinum P600’s Full Light Spectrum:
The Advanced Platinum LED P600 is a modern example of complete artificial light equivalent to real sunlight. This P600 LED grow light by advanced platinum generates a complete 12 band spectrum along with infrared (IR) and ultraviolet (UV) bands.
The finely tuned spectrum will help your cannabis plants grow regardless of what phase of growth they’re in. It boosts cell formation and leaf building in your marijuana plants which results in high quality resinous yields in return.
Take a look at the video in the next section to see the light spectrum measurement right after the gentleman measures the PPFD output.
The P600 also won best spectrum while comparing G8LED VS Platinum LED.
Intensity (PPFD): Unbeatable Results
Here comes the most potent factor of the Advanced Platinum P600 LED grow light.
Before revealing its PPFD results, it’s important to be able to decipher PPFD measurements first.
PPFD is short for Photosynthetic Photon Flux Density, or the intensity of photosynthesis enabling light hitting the surface of your plants. Most fruit or veggie producing plants need 30-40 moles of light per day in order to realize benefits compared to normal sunlight. The same holds true for marijuana plants. After working out the math, 308 -- 617 umol for an 18 hour vegetation light cycle. The closer to 617 umol the better. For flowering you’ll need 462 to 925 umols of light for 12 hours per day. The closer to 925 umol the better.
Where does the Advanced Platinum P600 come in on this front? As you’ll see in the video below, at an 18″ hanging height, it’s producing ~1160 umols which is more than enough for your cannabis plants to realize maximum benefit of grow lights when used in 12 hour cycles. then it has performed above the expectation concerning PAR. Yeah, it has been recorded with 1605 uMol from the height of 12”.
It’s an impressive level of brightness, not a level of power seen with other cheap LED grow lights.
Above all, intensity of Platinum LEDs is far better than some of the top rated COB Lights too.
Have a look at the PPFD and spectrum test video below:
The only other 600 watt LED grow light getting close to this type of reading is G8LED for which you’ll pay considerably more. We looked at five other 600 watt LED grow light models and they aren’t even close.
Advanced Platinum P600 Coverage Area:
PlatinumLED claims the P600 will cover 6’ X 3.75’ during vegetation and 5’ X 2-2.5’ during flowering. I like to be a bit more conservative because sometimes companies can exaggerate for marketing reasons. I’d personally estimate this light can cover 5x3ft during veg and 4x2ft during flowering.
Massive coverage is the primary reason for it being one of the best 600 watt LED grow lights.
Platinum LED offers a generous 5 year warranty on the P600 LED grow light. You just don’t see 5 year warranties often unless a company really believes in the quality of their product.
Best Low Cost 600 Watt LED Grow Lights:
The grow lights in this segment are significantly more affordable, but will provide you with a more moderate yield. The 600 in the name of these grow lights represents the total LED wattage instead of the total power consumption of the higher end segment above this. These lights also have a smaller coverage area, but they still get the job done well. These are the best 600 watt LED grow lights if you’re looking for a more affordable one.
Turn the “beast mode on” inside your grow space with this affordable 600 watt LED grow light.
When it comes to quality products at a reasonable price, Viparspectra is a strong competitor. In fact, the Viparspectra 600w LED grow light is one of the best sellers in the entry-mid level grow light range.
Viparspectra has been doing pretty well for the past few years. And with this grow light they’ve proven their expertise in the grow light manufacturing.
The Viparspectra PAR600 LED is a scientifically engineered and well crafted grow panel, especially for cannabis cultivators.
This grow light comes equipped with high-quality bridgelux and epistar LED chips. 120 LEDs of 5W each has been placed on this 600W LED Grow light.
Viparspectra PAR600 is a full spectrum LED Grow light and came with three mode switches. This grow light is capable of mimicking real sunlight.
Yeah, this unique 600W grow light comes with separate Red, White, Blue mode switches which provides comfortable switching between various phases of your marijuana plants’ lifecycle.
As the name suggests it’s a PAR600 variant, meaning from the height of 24” recorded PPFD Values are more than 600 uMol.
A secondary optical lens helps in magnifying light and increases PPFD and efficiency of produced light.
With all this fantastic light you’ll be getting an excellent coverage of 3’ X 3’ for your grow space.
For power consumption, the Viparspectra PAR600 utilizes only 274W maximum and with this low power draw it still produces 600W HPS/MH equivalent light for your grow space.
When it comes to cooling, viparspectra have shown their excellence of research in this case. Along with advanced heat sink, they’ve equipped 3 front facing fans which help in keeping your plants safe from harm due to heat.
Viparspecra provides this well-researched product to you with 3 years of excellent customer satisfaction and 30 days satisfaction or returns guarantee.
Moreover, if you’re one who’s aiming for Viparspectra grow lights only, but can’t afford them due to price then a bit lower priced version is available in Reflector series of Viparspectra.
Viparspectra PAR600 600W Grow Light – Specification And Details
||14.1” x 11.8” x 3.5”|
||700 uMol @ 24”|
||Complete Full Spectrum|
|Avg Power Draw (Max.):
|Avg Coverage (Max.):
||3’ x 3’|
||AC100V – 240V|
||Advanced Aluminium heat sink with front facing cooling fans.|
||3 Years warranty|
Pros And Cons Of Viparspectra PAR600
- Full spectrum
- Decent Coverage
- Unbeatable PPFD Results
- Higher Yield Per Watt Of Electricity
- Excellent efficiency
- Comfortable Three Modes
- Front Facing Cooling Fans
- Infrared spectrum
- Highly durable product
- Low Power Draw
- High level of customer satisfaction with 2 year support
- Not Dimmable
- Can’t daisy chain
With advanced design, quality of light, brightness and cooling capability it succeeds in securing its place as a runner up in the best 600W LED Grow Lights reviews.
We explained each reason which is solely capable of telling you that it deserves a place for sure in your marijuana growing space. Yeah, just take a look at Viparspectra PAR600’s price and features on amazon and you’ll understand what could be missed by not going for it.
This grow light is there on the top in the 600W grow light segment.
So, make your decision wisely, go with it if you’re not short on budget.
The 600 watt LED grow light from Bestva is one of the better 600 watt choices. I personally think Bestva’s light spectrum and intensity are among the best for low cost LED grow lights.
When it comes to more massive yield at precisely less investment, Bestva comes to your rescue and helps you in growing well with it.
This is the double chip (DC) 600 watt model. Double chip LEDs are efficient and bright enough to hold their water against other grow light models.
Instead of a simple grow panel they offer a reflector design to utilize the maximum possible amount of light generated.
They’ve changed the ratio of Blue: Red spectrum as well. It was 8:3 in its later version while this model features a 1:1 ratio for better and uniform quality of light for all the periods of your marijuana plants.The Bestva 600W Reflector comes with two mode switching feature which enables you to manage spectrum in a better way according to your plant’s phase of life.
Reflector lenses enhance the light beam effectively and delivers a 400W HPS equivalent light. Moreover, still, it will only pull 132W from our wall.
Now if you take a look at its coverage ability then a decent grow space of 2’ X 2.5’ can be covered using this LED with ease. It’s a bit less than competitors but this is an entry level model.
Moreover, the light uses high-temperature resistant material along with isolated power supply, which ensures the safety of you as well as your plants.
The manufacturer Bestva offers a complete 3 years hassle free warranty to their customers along with a 30 days satisfaction or return guarantee.
Bestva Elite Reflector 600W Specifications:
||11.5” X 7.9” X 2.8”|
|Avg Coverage (Max.):
||2’ X 2.5’|
|Power Draw (Max.):
||Multiple Cooling Fans With Amazing Cooling Mechanism|
||Dual Switch, Daisy Chaining|
||3 Year warranty + 30 Days Moneyback|
Pros And Cons Of Bestva 600W LED Grow Light
- Affordable Grow Light
- Great Full Spectrum Light
- Suitable for all the phase of plants
- High Quality Build
- More Light Penetration Using Reflector Design
- Easy Mode Switching
- Extremely low power consumption
- Well known brand with Smart R&D Team
- Cost Savvy from the beginning
- Large Lifespan
- Not Dimmable
- Timer would have been an added advantage
- Not Waterproof
Bestva has done a great job making these grow lights. They have a massive production facility where everything is quality tested. Existing users really like the light.
Considering the full picture of low cost and performance, I think it should be on the top of your list if you’re looking for a low cost light.
I recommend the Bestva 600W grow light to all those who have got a limited budget and still wants to start with small grow space and wants to provide their plants with high-quality light.
The Mars Hydro TS 600w LED grow light is one of Mars Hydro’s latest releases. It’s one of the best 600 watt LED grow lights because it offers a modern design, impressive performance, and overall good value compared to other 600 watt grow light models.
Spectrum And Light Intensity:
The TS 600 uses the same spectrum as its larger sized siblings in the Mars Hydro TS series.
More specifically, the spectrum on the Mars Hydro TS 600 is made up of 660nm (red), along with 3200-4200 kelvin, and 5200-6800 kelvin white spectrum. That’s enough to get your plant through all phases of growth.
The TS 600 has pretty impressive light intensity for a small grow light this size. 800 micromoles at 12 inch hang height is nothing to sneeze at. Of course, this light likely won’t cover a large area, but neither will the other low end models mentioned here.
One impressive aspect of the TS 600w is that Mars Hydro was able to get the quantum board design down to a small size for small applications.
||14 x 12.2 x 1.4”|
|Avg Coverage (Max.):
|Power Draw (Max.):
||Fanless design, efficient cooling|
||3 Year warranty + 30 Days Money back|
Check out this video of the bigger sibling, the TS 2000w. Same design, same idea!
Definitely one of the best 600w LED grow lights to consider!
I’ve spent a lot of time researching and updating this list. This is the best and most comprehensive list of good performing 600 watt grow lights. I’m sure you’ll find a great grow light for your grow space here. If you have any other questions feel free to reach out in the live chat!
The best 600 watt grow light is the G8LED 600 watt model. Compared to other 600 watt grow lights, it covers the most space, and emits high light intensity.
The best cheap 600 watt grow light is the Viparspectra V600. It provides a good spectrum and decent coverage area compared to other 600 watt grow lights.
There are many factors that affect the cost to run a 600 watt grow light. The high quality G8LED 600 watt consumes 380 watts, while the Viparspectra V600 consumes 260 watts.
Considering the average US cost per kilowatt hour is $0.13, it may cost you between $25.55 to $37.34 for a 6-week vegetative growth period using those wattage numbers.
A 10-week flowering period would cost between $28.39 and $41.49 using the above wattage numbers.
You can check out my Grow Light Cost Calculator to play around with more numbers.
In most cases 18 inches from your plants is a safe and effective distance to hang your 600 watt grow light.
If you’re using a powerful grow light like G8LED, Advanced Platinum, or anything emitting more than 400 micromoles (uMols), you should raise the light higher (~24-28 inches) during the vegetative phase when your plants utilize less intense light.
The less expensive grow lights typically don’t emit much over 400 uMols, so they’re safe to hang at 18 inches distance from your plant.
600 watt grow lights only require ballasts if the grow light is a High Pressure Sodium or Metal Halide style grow light. 600 watt LED grow lights do not require ballasts.
The average coverage space for a 600 watt grow light is between 1.5 feet by 1.5 feet and 2 feet by 2 feet. A high end 600 watt grow light such as the G8LED 600 watt, or the Advanced Platinum P600 will cover up to double that space.
You can grow as many plants as you can fit in your grow light’s respective coverage area. If your 600 watt grow light covers 2 feet by 2 feet, you can fit one large plant, or 2-3 smaller plants.
- MARUO, Toru, et al. “Effects of Supplemental Lighting with Light-Emitting Diodes (LEDs) on Tomato Yield and Quality of Single-Truss Tomato Plants Grown at High Planting Density.” Environmental Control in Biology, Japanese Society of Agricultural, Biological and Environmental Engineers and Scientists, 11 June 2012, https://www.jstage.jst.go.jp/article/ecb/50/1/50_63/_article.
- Chandra, Suman, Hemant Lata, Ikhlas Khan, and Mahmoud Elsohly. “Photosynthetic response of Cannabis sativa L. to variations in photosynthetic photon flux densities, temperature and CO2 conditions.” Physiology and Molecular Biology of Plants 14.4 (2009): 299-306.
- Sharakshane, Anton. “White LED Lighting for Plants.” bioRxiv (2017).
- Eichhorn Bilodeau, Samuel et al. “An Update On Plant Photobiology And Implications For Cannabis Production”. Frontiers In Plant Science, vol 10, 2019. Frontiers Media SA, doi:10.3389/fpls.2019.00296. Accessed 14 Oct 2019.
- Lin, K., Huang, M., Huang, W., Hsu, M., Yang, Z. and Yang, C. (2013). The effects of red, blue, and white light-emitting diodes on the growth, development, and edible quality of hydroponically grown lettuce (Lactuca sativa L. var. capitata). Scientia Horticulturae, 150, pp.86-91.
- He, Dongxian & Kozai, T. & Niu, Genhua & Xin, Zhang. (2019). Light-Emitting Diodes for Horticulture: Materials, Processes, Devices and Applications. 10.1007/978-3-319-99211-2_14.